IBT Li-Ion Polymer Cells 1000mAh to 5000mAh
LITHIUM ION POLYMER CELL – LARGER CAPACITY
The Lithium Polymer (Li Po) Cell larger capacity range (1000mAh to 5000mAh) includes over 200 models which offer designers increased flexibility when it comes to powering the next generation of portable devices. This technology produces compact lightweight high energy density power sources to fit in the tightest of spaces and helps reduce end product weight. For an overall product solution, cells or battery packs can be factory assembled with Protection Circuit Modules (PCM). Please contact us with your specific requirements or for further information.
FEATURES:
- Cell Capacity Range 1000mA to 5000mAh
- Nominal Cell Voltage 3.7v with 3.85v options
- UL1642 Safety Approval
- Ultra Lightweight
- Low Profile
- High Energy Density
- Cell / Battery Pack Assembly with PCM
CHARGE AND DISCHARGE PERFORMANCE CURVES
CHARGE
DISCHARGE
DISCHARGE
Typical Charge Graph for Li-ion polymer cell
CC/CV Charge at 4.2V, 0.5C, +23ºC ±2ºC
DISCHARGE
DISCHARGE
DISCHARGE
Typical Discharge Graph for Li-ion polymer cell
Discharge 0.5C, +23ºC ±2ºC, end point 3.0V.
CELL PACKS
IBT can offer Lithium ion polymer cells with factory fitted protection circuit modules (PCM). The PCM provides protection against over voltage, under voltage and over current / short circuits with an optional ntc thermistor output. Even with this pcb fitted, discharge termination and charge termination is required. The PCM may increase dimensions of the bare cell slightly.
Flying leads, output connectors and / or plastic cases can be fitted as required. Please contact IBT for further information.
BATTERY PACKS
Where a higher voltage or increased capacity is required cells can be factory assembled to form battery packs, incorporating a battery PCM. Cells can be arranged in series or in parallel, providing a flexible solution to maximise battery compartment space. As with the cell packs, flying leads and output connectors can be fitted as required. For higher volume packs, plastic-cased product can be developed. Please contact IBT for further details.